Roofing Contractor in Rondebosch, Cape Town
Roofing Contractor in Rondebosch
68 Projects Building Co re-roofs and repairs some of the oldest housing stock in the Southern Suburbs — century-old iron over timber, party walls shared with the neighbour, and original ceilings underneath that are worth protecting.
Your Local Rondebosch Roofing Contractor
The Oldest Roof Stock in the Southern Suburbs
Rondebosch roofs come with two complications you do not get in a newer suburb. The first is what is underneath: corrugated iron over timber, often with no underlay at all, and beneath that an original pressed-metal ceiling. A leak here does not cost you a sheet of ceiling board — it costs you a ceiling that cannot easily be replaced or matched, which is why we treat one as urgent.
The second is the party wall. On a semi the roof plane runs straight over the boundary, so the flashing at that junction is a shared detail and repairing one side properly means talking to the neighbour before work starts, not after. And with a large rental market near UCT, a great deal of this work has to land inside a fixed handover window rather than whenever the weather allows.
What's Included
Period Roofs, Handled by One Team
From the sheeting down to the original ceiling underneath it, the full scope sits with one contractor.
Inspection & Leak Tracing
We find the entry point, which on an old iron roof is often several metres from the ceiling stain.
Strip & Dispose
Old sheeting, battens, and perished underlay removed and carted away without dropping it inside.
Timber & Truss Repairs
Rotten purlins, battens, wall plates, and rafter ends replaced before any new covering goes on.
Corrugated Iron Roofing
Heritage-profile sheeting laid to the right lap and fixed so it sits flat on a century-old frame.
Party Wall & Parapet Detail
The shared junction on a semi, flashed and capped so the repair holds on both sides of the wall.
Flashings & Ridge Work
Chimney flashing, wall abutments, and ridge capping at the junctions where water gets in.
Gutters & Downpipes
Repairs and replacements, with leaf handling for the oak belt along the Liesbeek and the Common.
Pressed-Metal Ceiling Care
Working above original ceilings without wrecking them, and repairing them where water already has.
Where Roofs Fail
The Details That Decide Whether a Roof Leaks
On a century-old roof the failures are rarely dramatic. They are a lap that has opened as the frame moved, a flashing that was detailed for a building that has since settled, and a gutter that has been quietly overflowing behind the fascia for years.
Party Wall Junctions
On a semi the roof runs over the boundary. The flashing there is a shared problem, not yours alone.
Sheet Laps & Fixings
Old iron was fixed to a frame that has moved for a century. Lap and fixing spacing matter more here.
Flashings & Abutments
Chimneys and wall junctions on Victorian and Edwardian stock, where the original detail has failed.
Underlay & Ventilation
Most original iron roofs have none. Adding it changes how the roof space behaves for the better.
Eaves, Fascias & Gutters
Rot at the eaves is usually a gutter that has overflowed behind it through several oak seasons.
Ridge, Verge & Barge
Capping and edge detail bedded and pointed so wind-driven rain cannot track back underneath.
Why Choose Us
A Roofing Contractor You Only Have to Phone Once
On a period house the roof, the frame, and the ceiling are one problem, and splitting them between a roofer and a ceiling contractor is how original detail gets destroyed. We are a building contractor, so the sheeting, the timber underneath, and the pressed-metal ceiling below all sit with one team.
- One contractor for the roof, the ceilings below it, and the making good afterwards
- Local team working across Rondebosch and the Southern Suburbs
- Experience on Victorian and Edwardian roofs and original pressed-metal ceilings
- Party wall and shared roof plane work scoped so both neighbours know what is happening
- Programmes that can be held to a letting or academic-year handover date
- Written scope and fixed quote before anything is stripped
How It Works
From First Inspection to a Roof That Holds
Five clear stages, so you always know what is happening on your roof and what comes next.
Roof Inspection in Rondebosch
We inspect the covering, structure, drainage, flashing, and visible signs of water damage.
Diagnosis & Scope
We identify the likely cause of the issue and define the repair, replacement, or new roof scope clearly.
Detailed Quote
You receive a practical quote covering labour, materials, access requirements, and related building work.
Roofing Work
Our team completes the installation or repair with attention to waterproofing, fixings, and finish details.
Final Check
We check the completed work, tidy the site, and make sure the roof is ready for Cape Town weather.
Roofs We Work On
Mostly a Century Old
Most Rondebosch roofs we open are iron over timber on a frame that has been moving gently for a hundred years. Alongside them are pre-war semis with shared roof planes and later blocks of flats with low-pitch roofs.
Corrugated iron over timber
Victorian and Edwardian house roofs
Semi-detached and shared roof planes
Flat and low-pitch roofs on flats
Concrete and clay tiled roofs
Timber structure and truss repairs
Investment Guide
Roofing Costs in Rondebosch
These ranges cover the roof work itself. On period stock the biggest variable is how much of the original timber has to be replaced once the covering comes off.
Minor Repairs
From R2,500
Small leak repairs, cracked tiles, localised flashing repairs, and basic waterproofing fixes.
Larger Repairs
R8,000 - R35,000
Storm damage, valley repairs, partial roof replacement, structural timber repairs, and drainage corrections.
New Roofs
Quoted on site
Full re-roofing and new roof installations, priced on size, pitch, covering, access, and structure.
For the full range of work we take on, see our roofing services across Cape Town, then get in touch for a quote on your own roof.
Serving Rondebosch & Beyond
Where We Work
We work right across Rondebosch, from the older streets around the Common and the Liesbeek through to the rental stock near UCT. You can see the standard of our work on a Rondebosch renovation nearby. We also roof in Newlands, Claremont, and Bishopscourt, and we take on roofing across greater Cape Town.
More Than Roofing
Renovating the Rest of the House?
A roof is often the start of a bigger project. As a full building contractor in Rondebosch, we also handle extensions, kitchens, bathroom renovations, and structural alterations — so one team can carry the whole job.
Roofing FAQs for Rondebosch Homeowners
Party wall and shared roof planes on semis, pressed-metal ceiling damage, century-old iron over timber, body corporate roofs near UCT, and rental handover deadlines.
Do you do roofing work throughout Rondebosch?
Yes. We work across the whole suburb — the older streets around the Common and the Liesbeek, the residential blocks towards Rosebank and Mowbray, and the flats and rental stock near UCT, as well as neighbouring Newlands, Claremont, and Kenilworth.
My house is a semi. Does the roof repair involve my neighbour?
Often, yes, and it is better to know that at the quote stage than halfway through. On a Rondebosch semi the roof plane frequently runs over the party wall, so the flashing and capping at that junction is shared. Repairing only your side leaves the detail half-done. We scope the junction properly, tell you clearly what needs the neighbour's agreement, and quote it so both parties can see what is involved.
Will a roof leak damage my pressed-metal ceiling?
It is usually the most expensive part of the whole problem. A pressed-metal ceiling cannot simply be cut out and re-sheeted the way a modern board ceiling can — it rusts from above, stains through, and matching original panels is difficult and slow. This is why we treat a leak over an original ceiling as urgent rather than routine, and why we work carefully above them.
How old are most of the roofs you work on here?
Rondebosch has some of the oldest housing stock in the Southern Suburbs, so a lot of what we open up is corrugated iron over timber laid a century ago, with no underlay at all beneath it. That is not automatically a problem — well-maintained iron lasts remarkably well — but it does mean the frame underneath has to be checked properly before anyone quotes a recovering.
I own a flat here and the roof is the body corporate's. Can you help?
Yes, and this is a common situation near UCT. The roof belongs to the body corporate but the ceiling damage lands in your flat. We can inspect and report on where the water is entering so you have something concrete to take to the trustees or managing agent, quote the common-property roof work if they instruct us, and separately repair the ceiling and finishes inside your unit.
Can you finish before my tenants move in?
In most cases, yes, if we know the date up front. A lot of Rondebosch property turns over on the academic calendar, and a roof repair squeezed into the gap between tenants needs to be programmed rather than hoped for. Tell us the handover date at the site visit and we will tell you honestly whether the scope fits it.
Do you repair the ceiling damage as well?
Yes. We handle the roof and the making good below it as one job — including careful work on original pressed-metal ceilings and cornices — so there is one contractor and one quote rather than an argument about where the roofing ends.
How do I get a quote for my Rondebosch roof?
Get in touch to arrange a free site visit. We inspect the covering, the timber, and the drainage, trace any active leaks, and send you a written quote. You can also see the standard of our work on a nearby project in our Rondebosch renovation case study.
Still have questions? We're here to help!
Contact UsNeed a Roofing Contractor in Rondebosch?
Book a free site visit and we will inspect the covering, the timber underneath, and the drainage, trace any active leaks, and send you a clear written quote.