Painting Contractor in Paarden Eiland, Cape Town
Painting Contractor in Paarden Eiland
68 Projects Building Co delivers hard-wearing industrial painting for Paarden Eiland warehouses, workshops, and showrooms, with the marine-grade coatings and rust preparation a harbour-edge site demands.
Get a Painting Quote
Your Local Paarden Eiland Painters
Painting Built for the Harbour Edge
Paarden Eiland is one of Cape Town's oldest industrial areas, wedged between the Port of Cape Town and Table Bay. Warehouses, workshops, the motor trade, and showrooms sit on low, reclaimed ground, much of it built in the mid-twentieth century and exposed to sea spray with nothing in the way.
This is the toughest coating environment in the city, and it is unforgiving of shortcuts. Steel has to be taken back to sound metal and salt washed off, rising damp has to be treated at source, and only marine-grade systems are worth applying. Get the preparation right and the finish lasts; skip it and it fails within a season.
Painting Services
Painting Services We Offer in Paarden Eiland
From a showroom refresh to a full warehouse and steel repaint, we cover the painting and coating work premises in the area actually need.
Warehouse & Factory Painting
Internal and external repaints of warehouses, workshops, and stores, phased around your trading hours.
Showrooms & Motor Trade Premises
Customer-facing showrooms, workshops, and trade frontage painted to brand colours and finished neatly.
Marine-Grade Steel Coatings
Structural steel, canopies, and roller shutter frames blasted or wire-brushed, primed, and coated for harbour air.
Roof Sheeting Coatings
Corroded IBR and corrugated sheeting cleaned, rust-treated, and recoated with systems built for salt exposure.
Rising Damp & Salt Damp Treatment
Ground-floor damp and salt crystallisation on old walls diagnosed and treated before any coating goes on.
Offices, Canteens & Ablutions
Office suites, reception areas, and staff facilities painted with low-odour, quick-return products.
Line Marking & Floor Coatings
Aisle marking, walkways, parking bays, and epoxy or sealer coatings for workshop and yard floors.
Fencing, Gates & Yard Steel
Palisade fencing, security gates, bollards, and loading bay steel stripped, primed, and enamelled.
Why Choose Us
An Industrial Painting Team That Works Around You
Painting a trading workshop or showroom is a logistics exercise as much as a trade one. We plan the phasing, protect stock, vehicles, and equipment, keep frontage and access clear, and hand each area back clean.
- Industrial painting team working across Paarden Eiland and the Table Bay harbour edge
- Marine-grade coating systems specified for one of Cape Town's harshest corrosion environments
- Serious rust preparation, because patch painting over harbour corrosion never lasts here
- Rising and salt damp treated at source on older, low-lying building stock
- Night, weekend, and phased scheduling so trade counters and workshops keep running
- Safety files, method statements, and site inductions handled up front
What We Paint
Coatings for Every Surface on Your Site
Masonry, steel, and roof sheeting each need a different preparation method and coating system, and this close to the harbour the margin for getting it wrong is almost none. We specify the right product for each surface.
Warehouse & workshop walls
Showroom & trade frontage
Structural steel & roller shutters
IBR & corrugated roof sheeting
Old plaster & face brick
Palisade fencing, gates & yard steel
How It Works
Our Painting Process
A clear process keeps the job on track, keeps your business trading, and delivers a finish that lasts in a marine environment.
Site Assessment
We walk your Paarden Eiland premises and check substrates, corrosion, damp, coating adhesion, access, and trading hours.
Specification & Colours
We specify a coating system matched to the corrosion exposure here, and confirm brand colours and line marking.
Detailed Quote
You get a written quote covering access equipment, preparation, materials, coats, labour, and the working hours agreed.
Preparation
We salt-wash and degrease, take steel back to sound metal, treat damp, fill and prime, and protect stock and vehicles.
Painting & Handover
Coats go on to spec, detail work is finished, the site is cleared, and we walk the job with your facilities manager.
Local Knowledge
What We Look For on Paarden Eiland Buildings
Coatings fail for predictable reasons, and beside the harbour they fail fastest. These are the issues we most often find, and each is dealt with during preparation rather than covered over.
The Harshest Corrosion Exposure in Cape Town
Paarden Eiland sits between the Port of Cape Town and Table Bay, taking sea spray and salt-laden wind directly off the water. Steel corrodes here faster than almost anywhere else in the city. Nothing but a proper marine-grade primer and build-up will hold, and shortcuts show within a single winter.
Rising Damp on Low-Lying Reclaimed Ground
Much of the area is built on low, reclaimed land with a high water table. Salt-laden moisture wicks up through old masonry, crystallises behind the paint film, and pushes it off the wall. We diagnose and treat the damp and the salt before coating, rather than sealing the problem in.
Ageing Mid-Century Building Stock
Some of Cape Town's oldest industrial buildings are here, dating back to the 1930s and 1940s. Layers of old paint on tired plaster and brick often no longer bond to what is underneath. We test adhesion and strip back to a sound surface where the existing system has failed.
Relentless Wind Exposure
With no shelter between the buildings and the bay, the southeaster hits hard and carries salt and grit with it. That rules out spraying on the wrong day and demands coatings that will not chalk. We schedule exterior work around the wind and specify accordingly.
Diesel Soot & Motor Trade Grime
Heavy vehicle traffic, workshops, and the motor trade leave oily soot on facades, canopies, and workshop walls. This has to be degreased with the right products, not just hosed down, or the new coating will lift in sheets.
Trading Showrooms & Working Workshops
Most premises here stay open while we work, with customers walking in and vehicles moving through. We phase the job, keep frontage and access clear, use low-odour products, and paint after hours or over weekends where needed.
Cost Guide
Industrial Painting Costs in Paarden Eiland
Costs depend on area, building height, access equipment, corrosion level, coating system, and the hours you need us on site. We provide a site-specific quote before work begins.
Offices & Showrooms
From R2,500
Single offices, showrooms, canteens, and small internal areas, including preparation and two coats.
Warehouse & Workshop Repaints
R45,000 - R250,000
Internal and external warehouse and workshop repaints, priced by area, height, and surface condition.
Steel, Roofs & Marine Systems
Quoted on site
Structural steel, roof coatings, and marine-grade systems vary by access, corrosion level, and specification.
More From Our Team
Related Services
Painting is often part of a bigger job. As a full-service building contractor, we can handle the rest of the work too.
Painting Contractors in Cape Town
Our full painting service, covering industrial, commercial, and residential projects citywide.
Roofing Contractor in Cape Town
Roof sheeting repairs, replacements, and waterproofing for warehouses and industrial buildings.
Property Maintenance & Repairs
Planned and reactive maintenance for industrial premises, landlords, and facilities managers.
Building Contractor in Paarden Eiland
Structural steel and damp repairs, roofing, waterproofing, and fit-outs in the same area.
Serving Paarden Eiland & Beyond
Based in Cape Town, Painting Across the Harbour Industrial Belt
While we are proud to serve Paarden Eiland, our industrial painting team works across greater Cape Town, including Maitland, Ndabeni, Salt River, Woodstock, Milnerton, Montague Gardens, Epping Industria, Airport Industria, and Capricorn Park. Wherever your premises are, we bring the same thorough preparation, correct coating specification, and tidy workmanship.
Frequently Asked Questions About Painting in Paarden Eiland
Key painting questions for Paarden Eiland business owners, landlords, and facilities managers — covering marine-grade coatings, rust and rising damp, trading hours, access, costs, and quotes.
Do you work throughout Paarden Eiland?
Yes. We paint warehouses, workshops, showrooms, and office units across Paarden Eiland and the surrounding areas, including Maitland, Ndabeni, Salt River, Woodstock, Milnerton, and Montague Gardens.
How much does it cost to repaint premises in Paarden Eiland?
It depends on the area, building height, the condition of the existing coating, and how much rust and damp treatment is needed. Offices and showrooms start from around R2,500, while full warehouse and workshop repaints typically run from R45,000 upwards and are quoted after a site visit.
What paint do you use this close to the harbour?
Paarden Eiland is a severe marine environment, so standard trade paint is a waste of money here. We use marine-grade exterior systems on masonry and high-performance rust-inhibiting primers with durable top coats on all steel.
Our steel keeps rusting through the paint. Why?
Almost always because the corrosion was painted over rather than removed. Salt trapped under the film keeps working. We take steel back to sound metal by wire-brushing or blasting, wash off the salt contamination, apply the correct primer, and then build up the coats.
Can you deal with rising damp on ground-floor walls?
Yes. On low-lying reclaimed ground the water table is high and salt-laden moisture wicks up through old masonry. We identify the source, treat the damp and salting, allow proper drying, and use breathable systems where appropriate so the paint is not simply trapping moisture.
Can you paint without closing our showroom or workshop?
Yes. We phase the work around trading, keep frontage and vehicle access clear, and paint after hours or over weekends where needed, using low-odour products so the space is usable the next working day.
Can you match our corporate branding colours?
Yes. We colour match to your brand specification and advise on UV-stable formulations, which matters on exposed facades that take full sun and salt wind all year.
Do you do line marking and floor coatings?
Yes. We mark aisles, walkways, parking bays, and no-go zones, and apply sealers or epoxy coatings to workshop and yard floors where the surface is suitable.
How do I get an industrial painting quote?
Get in touch to arrange a free site visit. We assess the surfaces and access, discuss working hours and scope, and send you a written quote covering preparation, materials, equipment, and labour.
Still have questions? We're here to help!
Contact UsNeed a Painting Contractor in Paarden Eiland?
Contact 68 Projects Building Co for a free site visit, honest advice on marine-grade coatings, and a clear written quote for your Paarden Eiland painting project.